View GP1S44S1J00F_3841438.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

GP1S44S1J00F 1 sheet no.: d3-a05301en date oct. 3. 2005 ? sharp corporation notice the content of data sheet is subject to change without prior notice. in the absence of con rmation by device speci cation sheets, sharp takes no responsibility for any defects that may occur in equipment using any sharp devices shown in catalogs, data books, etc. contact sharp in order to obtain the latest device speci cation sheets before using any sharp device. GP1S44S1J00F phototransistor output, transmissive photointerrupter with actuator and connector description GP1S44S1J00F is a phototransistor output, transmis- sive photointerrupter with opposing emitter and detector in a case, providing mechanical actuator sensing. for this family of devices, the emitter and detector are insert- ed in a case, and a 3-pin connector is included to allow remote-mount or off-board designs. features 1. transmissive with phototransistor output 2. highlights : ? with spring lever type actuator 3. key parameters: ? actuator lever starting torque (initial): max.1 10 -4 nm 4. lead free and rohs directive compliant agency approvals/compliance 1. compliant with rohs directive applications 1. general purpose detection of object presence 2. example : ppc, fax, printer
2 sheet no.: d3-a05301en GP1S44S1J00F internal connection diagram outline dimensions (unit : mm) product mass : approx. 1.51g ? unspeci ed tolerance : 0.3mm. ? * ( ) : reference dimensions ? connector : df3a-3p-2dsa (hirose electric co. ltd. ) gnd v cc v out 1 2 3 1 2 3 15.3 8 18 17.2 1.5 r0.5 1.5 0.8 17 16.8 13.8 11.4 9.9 (8) 6.9 5.4 6.2 4 (9.35) 11 (8) 1 0.6 0.2 1.5 12.8 10.8 (5) ? 1 2.4 (20 ? ) (0.5) (5) 15.5 1 2 3 connector terminal plating material : sn marking 1 s x date code model identification mark ul mark
3 sheet no.: d3-a05301en GP1S44S1J00F repeats in a 10 year cycle date code (2 digit) 1st digit 2nd digit year of production month of production a.d. mark month mark 2000 0 1 1 2001 1 2 2 2002 2 3 3 2003 3 4 4 2004 4 5 5 2005 5 6 6 2006 6 7 7 2007 7 8 8 2008 8 9 9 2009 9 10 x 2010 0 11 y : : 12 z country of origin japan, philippines
4 sheet no.: d3-a05301en GP1S44S1J00F (t a = 25 ? c) cordition of light parameter symbol conditions min. typ. max. unit *5 light beam interupted dissipation current i cc1 v cc = 5v ?? 20 ma collector current i c1 without external disturbing light illuminance, v cc = 5v, v o = 5v ?? 50 a *6 light beam uninterupted dissipation current i cc2 v cc = 5v ?? 20 ma collector current i c2 without external disturbing light illuminance, v cc = 5v, v o = 5v 0.25 ?? ma ? operating voltage v cc t a = ? 20 to + 75 ? c 4.5 5 5.5 v ? 5 lever is normal condition on the fig.1. ? 6 lever is 30 or more movement condition from a point to b point on fig.1. absolute maximum ratings electro-optical characteristics (t a = 25 ? c) parameter symbol rating unit supply voltage v cc ? 0.5 to + 10 v *1 output voltage v out 35 v *2 output current i c 20 ma * 3 output power dissipation p o 75 mw *4 operating temperature t opr ? 20 to + 75 ? c *4 storage temperature t stg ? 40 to + 85 ? c ? 1 collector-emitter voltage of output phtotransistor. ? 2 collector current of phtotransistor. ? 3 collector current of output phtotransistor, refer to fig.3. ? 4 the connector should be plugged in/out at normal temperature.
5 sheet no.: d3-a05301en GP1S44S1J00F fig.3 collector power dissipation vs. ambient temperature fig.4 collector current vs. output voltage fig.2 relative output of i c vs. actuator lever angle on-state range of pt ( ? i c /2) relative output of i c (%) 0 100 042 37 32 actuator lever angle ( ? ) 50 collector power dissipation p c (mw) ambient temperature t a ( ? c ) ? 25 0 25 50 75 100 0 20 25 40 60 80 100 120 75 collector current i c (ma) outpout voltage v o ( v ) 810 6 5 4 3 2 1 0 04 2 v cc = 5.5v v cc = 5v v cc = 4.5v t a = 25 ? c fig.1 detecting position (20 ? ) normal position c point a point b point (37 ? 5 ? ) phototransistor between a point and c point shall be on-state when the actuator lever rotate d (37 5) from normal condition a point to c point in fig.1. at this time, collector current of phototrans- istor shall be ? i c /2. ? i c is an actual measurement value on collector current in electro-optical characteristics . normal condition b point shall be opaque con- dition. mechanical characteristics lever starting torque : 1 10 ? 4 n?m or less lever life 100 000 times or more (lever reciprocating operation between normal condition b point and c point at the condition of no load.)
6 sheet no.: d3-a05301en GP1S44S1J00F remarks : please be aware that all data in the graph are just for reference and not for guarantee. fig.6 output saturation voltage vs. ambient temperature 0.3 0.25 0.2 0.15 0.1 0.05 100 75 50 25 0 0 ? 30 ambient temperature t a ( ? c) v cc = 5v i c2 = 0.125ma light beam uninterrupted output saturation voltage v o(sat) (v) fig.7 collector current vs. ambient temperature (1) collector current i c1 (ma) ambient temperature t a ( ? c ) 025 ? 25 50 100 75 80 0.1 0.08 0.06 0.04 0.02 0 0.12 fig.5 collector current vs. ambient temperature (2) collector current i c2 (ma) ambient temperature t a ( ? c ) 025 ? 25 50 100 75 80 5 4 3 2 1 0
7 sheet no.: d3-a05301en GP1S44S1J00F design considerations design guide 1) prevention of detection error to prevent photointerrupter from faulty operation caused by external light, do not set the detecting face to the external light. 2) plug in/out of connector and using of hook should be carried out at normal temperature. 3) in case that the detection object is detected by actuator lever, please design to incline 30 ? or more the le- ver from normal condition. and please design not to add the external strength on the lever when the lever is reset. 4) there is a case that lever is consumed by detecting object. please con rm by the actual application. this product is not designed against irradiation and incorporates non-coherent ired. degradation in general, the emission of the ired used in photocouplers will degrade over time. in the case of long term operation, please take the general ired degradation (50% degradation over 5 years) into the design consideration. parts this product is assembled using the below parts. ? photodetector (qty. : 1) category material maximum sensitivity wavelength (nm) sensitivity wavelength (nm) response time ( s) phototransistor silicon (si) 800 400 to 1 200 3 ? photo emitter (qty. : 1) category material maximum light emitting wavelength (nm) i/o frequency (mhz) infrared emitting diode (non-coherent) gallium arsenide (gaas) 950 0.3 ? material case actuator lever black polycarbonate resin (ul94 v-2) black polycarbonate resin (ul94 hb)
8 sheet no.: d3-a05301en GP1S44S1J00F recommended installation hole drawing 1) we recommend to x the product at punching side on the xing plate (metal plate). 2) please decide the nal dimensions at your side after con rmation by the actual applications, because mounting efficiency and mounted stabilization are dependent on mounting plate corner-curve and punched state. 3) tolerance shall be 0.1mm normal mounting type plate thickness : 1.6mm 7.7 7.5 7.5 17 plate thickness : 1mm (unit : mm) plate thickness : 1.2mm 7.5 17 6 6 17 3.5 3.5 7.5
9 sheet no.: d3-a05301en GP1S44S1J00F manufacturing guidelines cleaning instructions solvent cleaning : please don't carry out washing so that there is moving portion in this device. (please remove dust and refuse by blower) presence of odc this product shall not contain the following materials. and they are not used in the production process for this product. regulation substances : cfcs, halon, carbon tetrachloride, 1.1.1-trichloroethane (methylchloroform) speci c brominated ame retardants such as the pbbos and pbbs are not used in this product at all. this product shall not contain the following materials banned in the rohs directive (2002/95/ec). ?lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb), polybrominated diphenyl ethers (pbde).
10 sheet no.: d3-a05301en GP1S44S1J00F package speci cation package materials tray : polystyrene pad : corrugated berboard packing case : corrugated berboard package method 100 pcs of products shall be packaged in a plastic bag, ends shall be xed by stoppers. the pad shall be put on top of the tray. and 2 plastic trays shall be put in the packing case. (1 packing conteains 200 pcs). packing composition pad packing case tray tray
11 sheet no.: d3-a05301en GP1S44S1J00F important notices the circuit application examples in this publication are provided to explain representative applications of sharp devices and are not intended to guarantee any circuit design or license any intellectual property rights. sharp takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of sharp's devices. contact sharp in order to obtain the latest device specification sheets before using any sharp device. sharp reserves the right to make changes in the speci cations, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. manufacturing locations are also subject to change without notice. observe the following points when using any devices in this publication. sharp takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used speci ed in the relevant speci cation sheet nor meet the following conditions: (i) the devices in this publication are designed for use in general electronic equipment designs such as: --- personal computers --- of ce automation equipment --- telecommunication equipment [terminal] --- test and measurement equipment --- industrial control --- audio visual equipment --- consumer electronics (ii) measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when sharp devices are used for or in connection with equipment that requires higher reliability such as: --- transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- traf c signals --- gas leakage sensor breakers --- alarm equipment --- various safety devices, etc. (iii) sharp devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- space applications --- telecommunication equipment [trunk lines] --- nuclear power control equipment --- medical and other life support equipment (e.g., scuba). if the sharp devices listed in this publication fall within the scope of strategic products described in the foreign exchange and foreign trade law of japan, it is necessary to obtain approval to export such sharp devices. this publication is the proprietary product of sharp and is copyrighted, with all rights reserved. under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. express written permission is also required before any use of this publication may be made by a third party. contact and consult with a sharp representative if there are any questions about the contents of this publication. [h178]

▲Up To Search▲

Price & Availability of GP1S44S1J00F

	To Download GP1S44S1J00F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .